Removal of coolants/ liquids from the surface of wires/cables in high-speed wire drawing, continuous resistance annealers or extrusion lines.

7 models from minimum to maximum diameters of 0.6mm to 38mm.

Compressed air consumption approximately 33m*/h.

Compressed air pressure 5 to 6 bar.

Lubricant Applicators

Especially for drawing mechanically descaled low and high carbon steel content wire. Can be installed within any die holder. Design features avoid lubricant lumps. 

Wire range diameter: 3mm to 12mm

Speeds up to 10 m/s

Increases die life by improved lubrication minimizing of lubricant "tunnelling".

Compact design with soap mixer. Direct water cooling

Designed to UNE 21-011-74 for maximum elongation tests and non-destructive elongation above a pre-set threshold value.

Soft wires.

Measuring range: 0.07mm to 2.5mm Æ

Length of test: 200mm

Electronic, digital reading in direct % elongation

Heavy steel construction. Easily accessible quick connections for compressed air. For horizontal or vertical applications.

For safe and easy lifting and tilting of reels/spools in wire and cable production and stores.

Reels:	DIN 46.397	DIN 46.397
Flange Æ	630	800

Double mechanical safety system.